4.67kW (4675W) Hybrid Solar Power Kit with 4.8kWh Battery Storage (for Tile/Slate Roofs)
£3,999.99
£3,949.99 (ex. VAT)
£4,739.99 (inc. VAT)
In Stock
What is a Hybrid Solar Power Kit?
A Hybrid Solar Kit is the integration of Solar Power, Lithium Ion Battery storage and grid energy.
Using a Hybrid Solar System, any surplus energy generated from the solar panels during the day will be used to charge the batteries, allowing the use of this energy later in the day when the solar panels aren’t generating. This allows the utilisation of energy generated from the photovoltaic system rather than drawing from the grid during peak times. The Hybrid Kit is also intelligent, with built-in export limitation and AC output limitation in response to grid frequency and voltage extremes.
Monitoring of the Solar Energy production and battery activity is clear and simple using the easy-to-read LCD display on the unit or through the user-friendly App or via a web browser.
The Hybrid Solar Kit also offers an EPS (Emergency Power Supply) to allow the battery power to be used in the event of a power outage.
What is included in a 4.67kW Hybrid Solar Kit?
11 x MCS certified All Black monocrystalline Solar Panels (425W minimum)
(Individual solar panel dimensions are approximately 1,722mm x 1,134mm x 30mm)
Please see our Solar Panel Page for available Solar Panel upgrades and prices.
1 x Solis/SoFar 3.6kW Energy Storage Hybrid Inverter (G98 certified)
1 x PylonTech 4.8kwh US5000 Lithium Ion Battery Module
– You can add more PylonTech 4.8kwh US5000 Lithium Ion Battery Modules to increase your storage capacity (at an extra cost)
1 x PylonTech US5000C Stackable Bracket Kit
1 x PylonTech Long DC Cable Pack (for connecting batteries to Inverter)
1 x Chint NC1-2508 Contactor for (EPS mode)
1 x Projoy 100A 2-Pole DC MCB Battery Isolator (DIN Rail Mounted)
1 x 50M 4mm Black PV Cable
4 x MC4 Connector (Pairs)
1 x Roof Mount Kit for Tile or Slate Roof (please specify layout when ordering)
2 x 20A, 3 Pole, Lockable, AC Isolators
1 x Emlite ECA2 Bi-Directional Single Phase Generation Meter
1 x Solar PV Warning Labels Sheet
1 x Battery Hazard Warning Label Sheet
1 x Installation Manual (inc. warranties and certifications) (via email)
1 x Customised G98 Document Pack (via email)
*Earthing equipment is not supplied (but is required as per the IET Code of Practice for Grid Connected Solar Photovoltaic Systems [1])
*Surge protection is embedded into the Enphase Micro-Inverters, but you must ensure that any additional surge protection is provided (if necessary) to meet the IET Wiring Regulations.
Our kits include ALL the G98 documentation required to commission your installation with your local DNO, as well as step by step instructions on the process.
When installing on Slate Roofs, or Sarking roofs, the Genius SolarFlash Solution is recommended. This is NOT included in the price of this kit, so please ask us if you wish to add this upgrade to your order. One Genius SolarFlash Kit is required for every roof hook within the installation.
Hybrid Solar Kit Technical Specifications
Solar Panels
The 4.67kW (4675W) Hybrid Solar Kit is supplied with 11 x 405W MCS certified All Black solar panels. Each solar panel has a 12 year manufacturer’s warranty.
Roof Mount Kit
The 4.67kW (4675W) Hybrid Solar Kit comes with a simple to install roof mounting kit to allow you to fix to a Garage, shed, house, stable or any other outbuilding with a tiled or slate roof. These are warrantied for 10 years.
Solis 3.6kW Energy Storage Hybrid Inverter
Max PV: 5400W
Max. DC Power for single MPPT: 2000W
Max. DC Input V: 600V
Max. Input/Output Current: 13.7A
Max charge/discharge: 3000W
Max efficiency: 97.6%
IP Protection class: IP65
Certification: G98
Dimensions: 566 x 394 x 173mm
Weight: 20.5kg
Warranty: 5 years
Pylon 4.8kwh US5000 Lithium Ion Battery Module
Nominal Voltage (V): 48V
Nominal Capacity (Wh): 4800Wh
Usable Capacity (Wh): 4560Wh
Dimension (mm): 442 x 420 x 161mm
Weight (kg): 38kg
Discharge Voltage (V): 44.5 – 53.5V
Charge Voltage (V): 52.5 – 53.5V
Charge/ Discharge Current (A): 25A (Recommended) | 50A (Max) | 90A (Peak @ 15s)
Communication Port: RS232 | RS485 | CAN
Working Temperature (C): 0 – 50C
Shelf Temperature (C): -20 – 60C
Authentication Level: TÜV | CE | UN38.3
Design Life: 10+ Years (@25C)
Cycle Life: >4500 (@25C)
Please view the Downloads section below for datasheets, certifications and installation manuals for this Hybrid Solar PV kit.
Important Information
In the UK solar panels rarely produce power at the rated output due to sun angle, time of year, as well as environmental, electrical, cabling, soiling and thermal losses (around 15% in total). As such our kits have been designed with a moderate DC:AC ratio so the system will produce energy earlier in the day, later into the evenings, and perform better on cloudy days. This means more energy is produced at these times, which is beneficial in the UK climate.
[1] All electrical work must comply with The IET Code of Practice for Grid Connected Solar Photovoltaic Systems, and the 18th Edition of the IET Wiring Regulations.
[2] Installers must ensure that the property’s electricity supply is suitable for the connection of the additional demand and generation of the system being installed.
[3] It is a requirement that you abide by the Health and Safety at Work Act 1974, when undertaking the installation of a Plug-In Solar Kit.
[4] All work on your property must comply with the latest Building Regulations in the UK. The ability of the existing roof to carry the load (weight) of the solar panels will need to be checked and proven. Some strengthening work may be needed. It is your responsibility to check this and undertake/organise appropriate works as necessary.
[5] You may require planning permission for your Solar installation. It is your responsibility to check. If you are in any doubt, contact your local planning department or visit the Online Planning Portal for further advice.
[6] Under G98 regulations, you must Commission your Plug In Solar Installation with your Distribution Network Operator (DNO) with 28 days of completion of the installation. We provide ALL the G98 documentation required to commission your installation with your DNO, as well as step by step instructions on the process. You can find out who your DNO is, and their contact details here: Who is My DNO
[7] Installations are undertaken at the customer’s own risk. Plug In Solar Ltd accepts no liability for any loss, damage or injury resulting from the installation. The Installation manuals provided are to be used as a guide only, and your discretion must be used when installing a Plug In Solar Kit. Plug In Solar Ltd take no responsibility for the incorrect installation of our product. You MUST follow ALL local regulations and abide by ALL necessary health and safety codes. You MUST consult a professional in the appropriate field if you are in doubt about any aspect of the installation.
*Over a 20 year period. Calculations undertaken using Solar Guide PV Calculator: (www.solarguide.co.uk/solar-pv-calculator) and the Energy Saving Trust cost and saving facility (http://www.energysavingtrust.org.uk/domestic/solar-panels)
**Based on A-Rated (or higher) appliances. Specific appliances ratings and equipment age will affect energy consumption and these examples are guidelines only. Appliance consumption information from Center for Sustainable Energy (www.cse.org.uk).
The Solar Panels, Micro-Inverters, mounts and fixings supplied with your kit may not match those shown in the photographs but will be of an equal or better standard.
Certifications
Downloads
> Solis Hybrid Solar Kit - Datasheet> Pylon 4.8kwh US5000 Lithium Ion Battery - Datasheet
> Pylon 4.8kwh US5000 Lithium Ion Battery - Installation Manual
Be the first to review “4.67kW (4675W) Hybrid Solar Power Kit with 4.8kWh Battery Storage (for Tile/Slate Roofs)”
Related Products
-
10 Year SaleFree UK Delivery*
3.40kW (3400W) Hybrid Solar Power Kit with 3.5kWh Battery Storage (for Tile/Slate Roofs)
Add to Cart£3,395.00£3,169.99 (ex. VAT)
£3,803.99 (inc. VAT) -
10 Year SaleFree UK Delivery*
3.82kW (3825W) Hybrid Solar Power Kit with 3.5kWh Battery Storage (for Tile/Slate Roofs)
Add to Cart£3,499.99£3,364.99 (ex. VAT)
£4,037.99 (inc. VAT) -
10 Year SaleFree UK Delivery*
4.25kW (4250W) Hybrid Solar Power Kit with 4.8kWh Battery Storage (for Tile/Slate Roofs)
Add to Cart£3,915.00£3,839.99 (ex. VAT)
£4,607.99 (inc. VAT) -
Free UK Delivery*
4.67kW (4675W) Hybrid Solar Power Kit with 4.8kWh Battery Storage with Adjustable Ground Mounts
£5,125.00 (ex. VAT)Add to Cart
£6,150.00 (inc. VAT)
Reviews
There are no reviews yet, would you like to submit yours?