Plug-In Solar 3.52kW (3520W) DIY Solar Power Kit with Renusol Console+ Tubs (for Ground or Flat Roof)
£3,399.99 (ex. VAT)
£4,079.99 (inc. VAT)
Plug-In Solar is a Do It Yourself (DIY) Grid-Tied solar power system, which allows you to generate FREE electricity to power your appliances. Plug-In Solar kits include ALL the equipment you need to start saving money on your electricity bills, WITHOUT the need for government incentives. No need for an EPC inspection, MCS Certification or The Smart Export Guarantee (SEG) Tariff.
PLEASE NOTE OUR PLUG-IN SOLAR KITS WILL NOT WORK OFF-GRID
Why Choose a Plug-In Solar DIY Solar Kit?
Plug-In Solar has a number of advantages over a ‘conventional’ Solar systems:
No EPC Inspections Necessary
No MCS Certification Required
Plug-In Solar Kits can be expanded at any time
Choose your own location for your Plug-In Solar installation
No Requirement for a Dedicated Installation Team (final connection and sign off by a qualified electrician is required )
What is included in a Plug-In Solar Kit?
Plug-In Solar 3.52kW DIY Flat Roof / Ground Mount Specifications
11 x MCS certified monocrystalline Solar Panels (320W minimum)
(Individual solar panel dimensions are approximately 1690mm x 1000mm x 35mm)
Please see our Solar Panel Page for available Solar Panel upgrades and prices.
11 x Enphase Q Cables
1 x Enphase Branch Terminators (End Cap)
1 x AC Cable Connector
1 x 2M AC Extension Cable
11 x Renusol Console+ Tubs with all fixings (15 degree angle)
1 x Warning Labels Sheet
1 x Warranty and Certification Document Pack (via email)
1 x Plug In Solar Installation Manual (via email)
*Earthing equipment is not supplied (but is required as per the IET Code of Practice for Grid Connected Solar Photovoltaic Systems )
Installing a Plug-In Solar kit is a simple Plug and Play assembly. You can install ALL the kit until the final connection (this will need to be performed by an electrician who will need to install a circuit breaker on a dedicated circuit )
With standard Solar PV kits, electricity generation is dependent on the panel that is performing the worst. These types of systems will will not perform well with panels that are oriented in multiple directions or if panel shading is an issue.
Plug-In Solar System Monitoring
Plug In Solar Kits use the Enphase Enlighten Monitoring Platform, which offers FREE, per panel monitoring via a Web Browser or the Enphase App. This gives you the assurance that your Plug In Solar Kit is performing as expected. With the Enphase Enlighten System you can easily verify system health and performance by the click of a button. You can find out more about the Enphase Enlighten Platform and its benefits here: Enphase Enlighten Demo Video.
How much money could I save with a Plug-In Solar kit?
You could SAVE an estimated £27,766.00 on your electricity bills with this 3.52kW (3520W) DIY Plug In Solar Power kit. That’s an average of £1,388.00 per year.*
What appliances can a Plug-In Solar kit power?
A 3.52kW (3520W) Plug-In Solar Kit is estimated to produce enough power to cover the energy consumption of ALL of the following, each year:**
|Microwave Oven||Tumble Dryer||Washing Machine||Fridge Freezer|
|901 cycles per year||520 cycles per year||780 cycles per year||24 hours per day
(for 365 days per year)
Plug-In Solar Kit – System Commissioning
Our kits include ALL the G98 documentation required to commission your installation with your local DNO, as well as step by step instructions on the process.
PLUG-IN SOLAR KIT COMPONENTS
The Solar Panel
The 3.52kW Plug-in Solar kit is supplied with 11 x 320W MCS certified monocrystalline solar panels. This solar panel has a 10 year manufacturer’s warranty and a 25 year 80% power performance guarantee.
The Enphase Micro-Inverter
This Plug In Solar Kit is supplied with G98 certified Enphase IQ7 Micro-Inverters. The Micro-Inverters convert direct current (DC) produced by the solar panels into alternating current (AC) for use in your home. As such, they form the heart of the Plug-in Solar Kit. The Enphase Micro-Inverter has a 25 year manufacturer guarantee.
The Enphase Envoy S Standard Monitoring Unit
The Enphase Envoy S Standard is an integral component of the Enphase Microinverter System, and is required for all Plug-In Solar Kits over 800W, in order to ensure compliance with the UK’s G98 Regulations. The Enphase Envoy allows you to monitor each individual solar panel in your installation, via the Enphase Enlighten App. More information about the Enphase Envoy can be seen here: Enphase Envoy
The Flat Roof / Ground Mount Kit
This Plug In Solar Kit is supplied with 11 x Renusol Console+ Tubs, which supports the modules, allowing ballasting (gravel, paving slabs, bricks, rocks etc) and is non-penetrative. The Renusol Console+ is fixed at 15 degrees and can be fitted on the ground, or on flat roofs with a pitch of up to 5 degrees. These are warrantied for 10 years.
All components within the Plug In Solar kit comply fully with the G98 requirements and have MCS certifications, where applicable. All certifications/warranties available on request
Please view the Downloads section for information on how much money you could save, and the appliances you can power with this Plug In Solar Kit.
Can I upgrade my Plug-In Solar Kit?
All of our kits are available for upgrade to a higher wattage solar panel. Please see our Solar Panel Page for available Solar Panels. Please email us for a bespoke quotation for this kit with the upgraded solar panels you have chosen.
You can also add solar energy battery storage to this Plug-In Solar kit by adding an Enphase AC Battery Storage Module.These are modular battery units that can be daisy chained in order to achieve the storage capacity you require.
If you have any other bespoke requirements for this kit, please contact us, we will be happy to accommodate your needs.
 It is a requirement that you abide by the Health and Safety at Work Act 1974, when undertaking the installation of a Plug-In Solar Kit.
 All electrical work must comply with The IET Code of Practice for Grid Connected Solar Photovoltaic Systems, and the 18th Edition of the IET Wiring Regulations.
 Installers must ensure that the property’s electricity supply is suitable for the connection of the additional demand and generation of the system being installed.
 All work on your property must comply with the latest Building Regulations in the UK. The ability of the existing roof to carry the load (weight) of the solar panels will need to be checked and proven. Some strengthening work may be needed. It is your responsibility to check this and undertake/organise appropriate works as necessary.
 You may require planning permission for your Solar installation. It is your responsibility to check. If you are in any doubt, contact your local planning department or visit the Online Planning Portal for further advice.
 Under G98 regulations, you must Commission your Plug In Solar Installation with your Distribution Network Operator (DNO) with 28 days of completion of the installation. We provide ALL the G98 documentation required to commission your installation with your DNO, as well as step by step instructions on the process. You can find out who your DNO is, and their contact details here: Who is My DNO
 Installations are undertaken at the customer’s own risk. The Installation manuals provided are to be used as a guide only, and your discretion must be used when installing a Plug In Solar Kit. Plug In Solar Ltd take no responsibility for the incorrect installation of our product. You MUST follow ALL local regulations and abide by ALL necessary health and safety codes. You MUST consult a professional in the appropriate field if you are in doubt about any aspect of the installation.
*Over a 20 year period. Calculations undertaken using Solar Guide PV Calculator: (www.solarguide.co.uk/solar-pv-calculator) and the Energy Saving Trust cost and saving facility (http://www.energysavingtrust.org.uk/domestic/solar-panels)
**Based on A-Rated (or higher) appliances. Specific appliances ratings and equipment age will affect energy consumption and these examples are guidelines only. Appliance consumption information from Center for Sustainable Energy (www.cse.org.uk).
The Solar Panels, Micro-Inverters, mounts and fixings supplied with your kit may not match those shown in the photographs but will be of an equal or better standard.