Hoymiles HMeter-CT-S120-RW

The Hoymiles HMeter sits on a DIN rail, normally in or adjacent to the consumer unit.

The CT has a 1M lead that connects to the HMeter to the live incoming cable near the consumer unit. The Meter talks to the Battery over Wi-Fi, so no need to run a cable between the two. You only need one meter for the system, no matter how many Batteries in the system.

The CT then tells the Hoymiles system, in real time, whether the property is importing from or exporting to the grid.

Based on this information, the Battery can determine when to charge/discharge depending on home usage.

This is not a mandatory item when the Solar Panels are wired directly into the Hoymiles HiBattery 4020X (4.02kWh) Solar Battery.

However if you are using a Plug In Solar Kit with a Micro-Inverter (or any other third party Solar Kit with it’s own dedicated Inverter) and wish to use the Hoymiles HiBattery 4020X (4.02kWh) Solar Battery, you will require this Meter.

Downloads

Hoymiles HMeter-CT-S120-RW - Datasheet